Guides
Measure once, in millimetres.
Three measurements and a tape. Choose where the blind will sit, enter the exact sizes, and we make the deduction so it fits first time.
Recess fit
The blind sits inside the window opening for a clean, built-in look. You need at least 60 mm of recess depth.
- Measure the width of the recess at the top, middle and bottom. Use the smallest.
- Measure the drop at the left, middle and right. Use the smallest.
- Enter the exact recess sizes. We make the deduction so the blind clears the frame.
Face fit
The blind mounts on the wall or architrave above the window. Best when the recess is shallow, or when you want to cover the frame.
- Decide where the blind will sit above and beside the window.
- Add 50 to 100 mm each side of the glass for light control, and above for the headrail.
- Enter the finished width and drop you want the blind to be.
Installing your blind
Every blind arrives with brackets, fixings and a fitting guide. Mark the bracket positions level, drill, fix the brackets, then clip the headrail in. Most windows take a drill and fifteen minutes.
Sizes are accepted from 300 to 6000 mm. Not sure of your numbers? Send a photo of the window and your rough sizes and the workroom replies with what to order: get in touch.